Showing posts with label Production. Show all posts
Showing posts with label Production. Show all posts

Unit 3.2 | Production - Location of production


All firms, whether they produce goods or services, have to decide where to locate. This often come down to a choice between being close to their customers, or producing where it is cheapest - but there are lots of other possible considerations too. For example:
  • Location of raw materials - the nearer you are, the lower the cost of transporting the raw materials.
  • Location of the market - for services, if you locate where people can easily go, you will get more customers.
  • Labour supply - Firms who need skilled labour need to locate where they can find these people. And firms who want to keep wages low may have to locate in areas of high unemployment. 
  • Government policy - Governments often pay big multinationals to locate in their country. 
  • Personal reasons - Owners and managers are human - they want somewhere nice to live. 
  • Climate - it’s obvious but important - especially in agriculture.

Unit 3.2 | Production - Quality control and quality assurance


Businesses must ensure that all the products it sells are free of faults or defects, to ensure that the business will maintain a good reputation. There are several ways businesses can ensure that they produce a good quality product or provide a good service:

Quality control
To make sure that products go out of factories wit no defects, they should have a Quality Control department. The Quality control department would check that quality was being maintained during the production of goods, try to eliminate errors before they occurred, and find any defective products before they reach to the customer. 

Quality assurance
The purpose of quality assurance is to make sure that the customer is satisfied, with the aim of achieving greater sales, increased added value and increased profits. Attention must be paid to the design of the product, the complements and the materials used, delivery schedules, after-sale service and quality control procedures.

TQM
It is the continuous improvement of products and processes by focusing on quality at each stage of production. 

Unit 3.2 | Production - Costs & Break-even analysis


Fixed costs: Costs that do not change as output changes. E.g: rent, salaries, insurance.

Variable costs: Costs that change as output changes. E.g. raw materials, wages.

Direct costs: Costs that can be directly linked to particular product lines. E.g. costs of running the machinery used to manufacture individual products, cost of raw materials used in the product.

Indirect costs/Overheads: Costs that are shared between the different product lines and do not relate to one particular product line. E.g. cost of stationery used for all the company’s products, salaries of office staff who are involved with all the products. 

A break-even chart shows how much you need to sell. The break-even point is the level of output where the firm will just cover its costs. Sell more and it will make a profit, sell less and it will make a loss. To calculate the break-even point, you have to do this calculations:

selling price - variable cost = contribution
total fixed costs ÷ unit contribution = break-even point

Break-even analysis has its limitations:
  • It assumes that the firm can sell any quantity of the product at the current price.
  • It assumes fixed costs never change - but as output increases the firm may need more machines, bigger offices and so.
  • Finally it assumes that all the products will be sold. This doesn’t always happen.

Unit 3.2 | Production - Lean Production


Lean Production: techniques used by businesses to cut down on waste and therefore increase efficiency.


Lean production might include using any of the following methods:

1. Kaizen: it means “continuos improvement” in Japanese, and its focus is on the elimination of waste. E.g. reduce amount taken for workers to walk between jobs so they eliminate unnecessary movements, getting rid of piles of stock, ... etc.

Advantages:
  • increased productivity
  • reduced amount of space needed for the production process
  • work-in-progress is reduced

2. Just-in-time: production method that involves reducing or virtually eliminating the need to hold stocks of raw materials or unsold stocks of the finished product. Supplies arrive just at the time they are needed. 

3. Cell production: where the production line is divided into separate, self contained units (cells), each making identifiable part of the finished product, instead of having a flow or mass production line. 

Advantages:
  • improves morale of the employees, as employees feel more valued.
4. Kanban: operates by having two component bins, one on the production line and one being made ready. It reduces the amount of part-finished stock and means that everyone has to work together and efficiently so that production is not held up.

Unit 3.2 | Production - Economies & Diseconomies of scale


Economies of scale are factors that lead to a reduction in average costs that are obtained by growth of a business. There are five economies of scale:
  1. Purchasing economies: When businesses buy in bulk, they reduce the unit cost of each item, because when a business buys in bulk it is able to gain discounts. This gives the firm advantage over smaller businesses which buy in small quantities. 
  2. Marketing economies: More money for advertising and own transportation, cutting costs.
  3. Financial economies: Large businesses are often able to raise capital more cheaply than smaller ones. Bank mangers often consider that lending to large organisations is less risky than lending to small ones. A lower rate of interest is therefore often charged.
  4. Technical economies: They can now buy specialised and latest equipment to cut overall production costs. 
  5. Managerial economies: Larger businesses can now afford specialist managers in all departments, increasing efficiency. 
However, there are diseconomies of scale which increases average costs when a business grows:
  1. Poor communication: It is more difficult to communicate in larger firms since there are so many people a message has to pass through. The managers might loose contact to customers and make wrong decisions. 
  2. Low morale: People who work in large businesses with thousands of workers do not get much attention. They feel they are not needed so this decreases morale and in turn efficiency. 
  3. Slower decision making: More people have to agree with a decision and communication difficulties also make decision-making slower as well.

Unit 3.2 | Production - Methods of production


Production is the provision of a product or a service to satisfy consumer wants and needs. The process involves firms adding value to a product. 

Productivity:  the output measured against the inputs used to create it.

This is measured by dividing the output over a given period of time by the number of employees:

Output (over a given period of time) / Number of employees

As employees become more efficient, the amount of output produced per employee will rise and therefore the cost of producing the product will fall. 

There are three main methods of production during the growth of a company:

1. Job production - where a single product is made at a time, because each order is different. Example: cinema films, made-to-measure suits, bridges, ... etc.


Advantages
Disadvantages
Product meets exact requirements of the customer.
Skilled labour is often used.
Workers have varied jobs.
The costs are higher cause it is often more labour intensive.
More varied jobs increases employee motivation.
-


2. Batch production - is where a quantity of one product is made, and then a certain number of another product is made. 


Advantages
Disadvantages
Flexible way of working and production can easily be changed from one product to another.
Can be expensive.
Gives some variety to workers’ jobs.
Warehouse space will be needed for stocks and raw materials and other components. 
Production not affected much if machinery breaks down.
-


3. Flow production - where large quantities of a product are produced in a continuos process. 


Advantages
Disadvantages
Costs are kept low and therefore prices are also lower, which usually mean high sales.
Very boring system for workers, so little job satisfaction.
Little training of workers is needed.
Capital costs of setting up the production line can be very high.
Goods are produced quickly and cheaply.
If one machine breaks down, the whole production line will have to be halted.


The most important factor which determines which method of production to use will be the demand for the product:

  • If fairly unique product or an individual service is required, job production will be used.
  • If demand is higher and more products can be sold but in not very large quantities, batch production will be used.
  • If there is a large and steady demand for the product, flow production will be used.

 
Converted by Ritesh Sanap | Sponsored by Downloaddeck.com Powered by Giant Themes